In case you are already operating a receiving station and you are using the "Ship Plotter" software (or any other similar software) to process and publish your data, then you can easily send us your data without interrupting your current setup at all.
Just configure Ship Plotter to additionally send the data to our server. Go to 'I/O settings' and locate the "UDP peer-to-peer output" section. Enable the output to Remote IP "126.96.36.199", Remote port "XXXX". Where XXXX is the number of the port that you have been provided with after registering your station by adding it to our stations list. It is as simple as that!
Note that the same settings may also be applied to other chart-plotter software programs that are capable of processing and forwarding AIS data.